The production and use of citric acid for the removal of potassium from the iron ore concentrate of the Sishen Iron Ore Mine, South Africa

Authors

  • Peter Williams Department of Chemical Engineering, Faculty of Engineering, Built Environment & IT, University of Pretoria, Pretoria 0002
  • Thomas Cloete Science Faculty

Abstract

The depletion of the richer iron ore worldwide has made it necessary to process lower quality iron ore. Certain substances, such as potassium, contained within the lower quality iron ore, have a detrimental effect on the smelting process during steel manufacturing. Therefore, international steel-making companies charge penalties when purchasing iron ore concentrates containing high concentrations of potassium. To date, lower quality iron ore has been blended with high quality iron ore in an attempt to alleviate the potassium concentrations in the export iron ore; however, the ratio of low quality iron ore to high quality iron ore is increasing, thereby becoming an escalating problem within the economic functioning of the Sishen Iron Ore Mine. It has, therefore, become necessary to develop an economically viable and environmentally friendly process to reduce the high potassium concentrations contained in the iron ore concentrate of the Sishen Iron Ore Mine. In this study, we compared solid substrate and submerged fermentation using Aspergillus niger for the production of citric acid, which is used for the chemical leaching of potassium from the iron ore concentrate. It was found that submerged fermentation proved to be more economical and efficient, producing a maximum citric acid concentration of 102.3 g/L in 96 h of fermentation. 'Heap leaching' simulation experiments were found to be uneconomical, due to the required addition of fungal growth medium every 5 days as a result of growth factor depletion within this time; however, this process removed 17.65% of the potassium from the iron ore concentrate. By contrast, chemical leaching of potassium from the iron ore concentrate proved to be most efficient when using a 1 mol citric acid leaching solution at 60 ºC, removing 23.53% of the potassium contained within the iron ore concentrate. Therefore, the most economical and efficient process for the removal of potassium from the iron ore concentrate of the Sishen Iron Ore Mine involved a two-stage process whereby citric acid was produced by A. niger, followed by the chemical leaching of the potassium from the iron ore concentrate using a 1 mol citric acid leaching solution at 60 ºC.

Author Biography

  • Peter Williams, Department of Chemical Engineering, Faculty of Engineering, Built Environment & IT, University of Pretoria, Pretoria 0002
    Department of Chemical Engineering, University of Pretoria, Pretoria 0002, South Africa

Published

2010-04-23

Issue

Section

Research Articles

How to Cite

Williams, P., & Cloete, T. (2010). The production and use of citric acid for the removal of potassium from the iron ore concentrate of the Sishen Iron Ore Mine, South Africa. South African Journal of Science, 106(3/4), 5 pages. https://sajs.co.za/article/view/10170
Views
  • Abstract 142
  • PDF (315 KB) 149
  • HTML 190
  • XML 67
  • Figure 1 0
  • Figure 2 0
  • Table 1 0
  • Table 2 0
  • Table 3 0